DIY Ombre Pot: Hibiscus in the House!

Some of you might know that I have family living in Malaysia, which is suddenly relevant because May’s Plant of the Month at The Joy of Plants was the Hibiscus, Malaysia’s national flower!

05.Hibiscus.5

The Hibiscus flower always reminds me of hotter, sunnier climes; aren’t Hawaiian shirts typically covered in the flower, for example? And I’m pretty sure hibiscus drinks/cocktails were invented in the tropics (by the way, there is a recipe for hibiscus tea on the website, and it looks YUM. Did you know that the flower is full of vitamin C and can lower blood pressure? Well, now you do!).

05.Hibiscus.305.Hibiscus.8.

It’s only fitting then, now summer is upon us, that we spend some time admiring the hibiscus plant and showing it off in our homes. Here’s a DIY for a dip-dye flower pot! Enjoy.

What you need:

  • Hibiscus (in a pot)
  • Glass tank, vase or a bucket
  • Coat hanger with clamps (the kind for clipping trousers with)
  • Tin that will fit the plant
  • Piece of cotton fabric, preferably washed so that it doesn’t shrink
  • Pot to mix the glue with water
  • Textile dye
  • Salt to add to the dye (so it will set)
  • Paintbrush
  • Scissors
  • Rubber gloves

05.D.I.Y.2

Fill the tank vase with dye according to the instructions. Cut the fabric to the width of the tin. Hang the longer side of the fabric on the coat hanger.

05.D.I.Y.3

Put the rubber gloves on and lower the bottom half of the fabric into the dye. Take the fabric out after 1 minute and then lower the fabric a bit further into the dye. After 5 minutes take the fabric out of the dye again and then lower it even further into the dye. You do this until the whole fabric is coloured in stages. Tip: attach the hanger to a string hanging from something, so that you don’t have to hold the fabric the whole time.

05.D.I.Y.4

Let the coloured fabric dry. Then mix the glue with the water in the pot. Cover the whole tin with the glue mixture and stick the fabric to the tin. Make sure that the end of the fabric is glued securely so that it can’t come loose.

05.D.I.Y.5

Your dip dye pot is now ready! Now all you have to do is put your Hibiscus in it. It will look best if the edge of the plastic plant pot is at the same height as the edge of the tin. You could put stones, or something else in the bottom of the tin to fill it up to right height.

05.D.I.Y. 1

Images and DIY courtesy of The Joy of Plants

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s